Friday, May 20, 2022
Home3D Printing3D Printing Webinar and Occasion Roundup: January 16, 2022 - 3DPrint.com

3D Printing Webinar and Occasion Roundup: January 16, 2022 – 3DPrint.com


We’re again in enterprise this week with loads of webinars and occasions, each digital and in-person, beginning with the second version of the all-female-speaker TIPE 3D Printing convention. There are additionally webinars on subjects together with an SLS 3D printer, digital surgical planning, 3D pores and skin bioprinting, supplies, and extra. Learn on for all the main points!

TIPE 3D Printing Convention 2022

For the second 12 months in a row, Ladies in 3D Printing (Wi3DP) is holding its digital TIPE 3D Printing Convention and Profession Truthful, distinctive in that it’s the one trade occasion with all-female roster of audio system. From Tuesday, January 18 till Thursday, January 2022, greater than 100 ladies will current throughout the occasion’s 4 tracks of Know-how, Trade, Individuals, and Economics. It’s a formidable listing of audio system and subjects, and 3DPrint.com is a proud media sponsor for the convention, which may even embody the Profession Truthful and loads of time for networking.

“With a deal with case research, additive manufacturing person purposes, visionary talks on the long run, and folks shaping the trade, TIPE | 2022 curates an inspirational all-women agenda of audio system and panelists. Lengthy-lasting connections and networking alternatives are emphasised all through this human-centered occasion, which welcomes all members of the additive manufacturing and associated neighborhood.”

You’ll be able to register for the digital TIPE 3D Printing Convention and Profession Truthful right here.

SOLIDWORKS CAM Coaching & Webinar Sequence

HCL Technologies is holding a free instructional webinar sequence on SOLIDWORKS CAM and CAMWorks on Tuesday the 18th and Thursday the twentieth to assist attendees acquire a future benefit. At 10 am EST on the 18th, you may take “SOLIDWORKS® CAM and CAMWorks – Getting Began,” adopted by “SOLIDWORKS® CAM and CAMWorks – Getting Began with the TechDB” at 1 pm EST the identical day. Then, the sequence will finish with “SOLIDWORKS® CAM for Designers – A Path to Higher Designs” at 10 am EST on the twentieth.

“This webinar sequence will present a chance to sharpen your CAM expertise and probably study extra superior options and functionalities that may assist you safe further orders, serving to increase what you are promoting operations.”

Shapeways & Mimaki: Texture-Based mostly Colour 3D Printing

At 11 am EST on the 18th, Shapeways and Mimaki are holding a webinar referred to as “File Preparation for Texture-Based mostly Full Colour 3D Printing” collectively. Audio system Rhonda Giedt, Shapeways’ Director of Advertising; Josh Hope, Sr. Supervisor, Digital Imaging & Innovation for Mimaki USA; and Jaime Martinez, Mimaki USA 3D Functions Specialist, will focus on establishing settings for scale items, texture maps and base colour textures, optimize recordsdata with mesh inspection and decimation, the advantages of speedy prototyping and mass customization, UV unwrapping and assigning supplies, and extra.

“Shapeways and Mimaki co-present one other informative webinar collectively, introducing all the pieces from the fundamentals in 3D printing with texture to enhancing options and colour proofing.”

You’ll be able to register for the webinar right here.

Sinterit on the Lisa X 3D Printer

Throughout Formnext 2021, SLS 3D printing chief Sinterit launched its newest system. This Tuesday the 18th at 12 pm, be a part of the corporate for a webinar on the “Sinterit Lisa X – the quickest compact 3D printer within the Sinterit supply.” Hosted by Sinterit’s After Gross sales Supervisor Robert Garbacz, Worldwide Gross sales Supervisor Dominik Stasiak, and CTO Michał Grzymała – Moszczyński, attendees will study simply how briskly the 180 x 130 x 330 mm construct measurement Lisa X can print, along with particulars about its open surroundings, straightforward materials altering and operation, and extra.

“Take the prospect to fulfill a very new product and focus on its specs with the Sinterit staff.

“What’s extra: you’ll have an opportunity to see how completely different industries use compact SLS 3D printers to attain their enterprise objectives.”

You’ll be able to register for the webinar right here.

ASTM on Microstructural Management Throughout 3D Printing

Transferring on to Wednesday, January nineteenth, ASTM Worldwide’s AM Middle of Excellence (AMCoE) is holding a webinar titled “Microstructural Management throughout Additive Manufacturing” at 10 am EST. Taught by Professor Moataz Attallah from the College of Birmingham, attendees ought to come away from the webinar with an understanding of use scanning methods and warmth enter course of parameters to regulate mechanical properties and the microstructure, the influence of laser pulsing on mechanical properties and microstructure, and extra.

“When some AM customers optimise laser-based additive manufacturing methods, they cease their parametric mapping as soon as they discover a extremely dense situation. This work highlights the opportunity of having a number of ‘optimum (dense) circumstances’, the place the parameters can be utilized to regulate the grain construction, solidification by-product phases, and chemical segregation, by controlling the laser energy. This highlights the utlity of the method in controlling the mechanical properties by the management of the grain construction, or creating a selected microstructure. That is significantly helpful in restore purposes to match the substrate grain construction.”

Register for this webinar for $49 right here.

Materialise: Digital In-Home Surgical CMF Planning

Materialise is speaking about creating predictable surgical outcomes and “Empowering Surgeons with Digital In-Home Planning in CMF” at 10 am EST on the nineteenth. Prof. Joachim Obwegeser, Dr. Jörg Beinemann, Dr. Jan Liese, Prof. Massimo Robiony, Dr. Alessandro Tel, Prof. Giovanni Gerbino, and Martijn Orye will focus on particular instances by which they used Materialise PROPLAN CMF software program to make important preoperative selections and optimize therapy. Attendees may even discover ways to combine the platform right into a scientific workflow.

“Medical 3D printing and image-based planning have revolutionized affected person care. On this webinar, you’ll uncover how our versatile PROPLAN CMF™ platform helps surgeons carry therapy to the very best stage with options that allow you to preoperatively plan cranio-maxillofacial (CMF) procedures, similar to mandible and midface reconstructions, osteotomies, and orthognathic procedures.”

You’ll be able to register for the webinar right here.

3D Techniques Persevering with Automotive 3D Printing Sequence

Persevering with with its automotive 3D printing sequence, 3D Techniques is holding its second episode, on “Dramatically Improve Productiveness of Your Automotive Injection Molding,” at 10:30 am EST on the nineteenth. Aggressive stress is rising as innovation boundaries within the automotive trade get smaller, which makes the correct additive purposes important. Kevin Baughey, 3D Techniques’ Section Chief for Transportation & Motorsports, and Iñigo Marco, Senior Utility Growth Engineer for the corporate’s Utility Innovation Group (AIG), will focus on new methodologies for apply extremely productive conformal tooling on complicated instruments to be able to decrease mildew design time and enhance productiveness, how to make sure high quality by focused warmth administration, and extra.

“Decreasing cycle time whereas defending high quality is the important thing to rising injection molding productiveness. With cooling for complicated elements accounting for as much as 70% to 80% of the full cycle, making cooling simpler is a logical place to begin for rising effectivity. So why are extended cooling instances nonetheless so widespread? As a result of incorporating well-designed cooling methods is troublesome with standard approaches.”

You’ll be able to register for the webinar right here.

HP Holding Stay Digital Tour 

At 12 pm EST on Thursday, January twentieth, HP is holding a dwell digital tour of its 3D Printing Demo Middle as a part of a sequence of dwell tour classes on the firm’s 3D Buyer Welcome Middle. Carolina Rubio, HP’s 3D Printing Buyer Program Supervisor, and Wes Kramer, HP 3D Printing Utility Engineer, will be a part of Sean McClure, Prosthetics R&D Engineer for Quorum Prosthetics, to debate how HP’s Multi Jet Fusion expertise works, supply an summary of the 3D printing workflow, focus on purposes, reply questions, and extra.

“On this session, you’ll find out about HP Multi Jet Fusion Know-how and the way the HP 3D Printing Finish-to-Finish Course of works, from file preparation to post-processing.”

You’ll be able to register for the tour right here.

AM Coalition Discussion board on Congressional Coverage & Funds

The Additive Manufacturing Coalition is holding a dwell Zoom discussion board on the twentieth at 3 pm EST, “A View From Washington: Congressional Coverage and Funds.” Panelists embody Jonathan Cardinal, Director of Financial Growth (Workplace of Majority Chief Chuck Schumer), Sydney Terry, Chief of Workers (Workplace of Congresswoman Jan Schakowsky), and Dahlia L. Sokolov, Workers Director (Subcommittee on Analysis and Know-how, Home Science Committee).

“An informative dialogue about what to anticipate from Congress and the Administration for 2022.”

You’ll be able to RSVP for the discussion board right here.

3DHeals on Bioprinting for Pores and skin

When you’re desirous about listening to extra about “3D Bioprinting for Pores and skin,” tune in to the 3DHeals webinar at 4 pm EST on Thursday the twentieth. Attendees will find out about trade insights and the newest analysis and improvement into this subject from a various panel of specialists: Dr. Abbas Shafiee, Senior Analysis Fellow with Herston Biofabrication Institute, Royal Brisbane & Ladies’s Hospital; Colin McGuckin, Founder and Chairman of CTIBiotech; Axel Guenther, Professor within the Division of Mechanical and Industrial Engineering, and cross-appointment on the Institute of Biomedical Engineering, on the College of Toledo; and Amaris Castanon, Area Utility Specialist at Cellink. William Harley, a PhD candidate throughout the Faculty of Biomedical Engineering on the College of Melbourne, will average the panel.

“Pores and skin and its derivatives of hair follicles, nails, sweat, and oil glands play a myriad of necessary roles inside our physique. For the reason that pores and skin comes into direct contact with the skin world, it’s extremely vulnerable to cuts, abrasions, and burns. Though the pores and skin has a better regenerative capability than most tissues, the restore of large-scale deep accidents, similar to deep burns, is especially scar restore. The present normal of look after sufferers with extreme massive space pores and skin defects consists of autologous pores and skin grafting or dermal substitutes. Nevertheless, the scarcity of donor pores and skin websites and an infection dangers restrict the appliance of grafts and rising dermal substitutes nonetheless face challenges in delivering cells to clinically related wound topologies and the promotion of vascularization. The 3D bioprinting of pores and skin fashions has garnered rising analysis curiosity in recent times as a result of potential in illness modeling, testing the efficacy of latest therapies, and offering alternate options to animal testing. Continued developments in 3D bioprinting pores and skin equivalents present promise in defining the composition of biomaterials, cells, and bioactive components for accelerated wound regeneration.”

You’ll be able to register for the webinar right here.

Materialise & Arkema: Sustainability in Eyewear

The ultimate webinar of the week is by Materialise, “Empowering Sustainability in Eyewear: The Story behind Bio-Based mostly PA 11 Materials with Arkema,” at 5 am EST on Saturday, January twenty second. Attendees will find out about PA11, the brand new bio-based materials by Materialise and Arkema that’s good for purposes in 3D printed eyewear. Alireza Parandian, the International Head of Enterprise Technique for Wearables at Materialise, and Sophie Mulsant-Kern, Enterprise Growth Supervisor at Arkema, will focus on the story behind the creation of PA11, how the 2 corporations empower sustainable eyewear manufacturers, and extra.

“Sustainability is excessive on the agenda for a lot of eyewear manufacturers. So, how are Materialise and Arkema empowering sustainable selections in a subject identified for quick vogue? On this webinar, we’ll share the why and the way behind PA 11: our new bio-based 3D printing materials for aware eyewear manufacturers.”

You’ll be able to register for the occasion right here.

Do you could have information to share about any future webinars or digital and dwell occasions? Please tell us!



RELATED ARTICLES

Most Popular

Recent Comments